Classification and Introduction of Furniture Test Machine

A furniture test machine can be used to test the appearance, environmental protection, and physical properties of furniture... Let's take a look at the classification of the furniture test machines.

Appearance inspection

Visual inspection and ruler measurement are adopted for appearance inspection and on-site inspection. It mainly includes functional size, finishing, coating, etc. The functional dimension must meet the use requirements and ensure that it is within the allowable tolerance range. If the functional dimension fails to meet the requirements, the product is unqualified and the service performance is reduced.

Testing of physical and chemical properties of furniture

It mainly tests seven indexes, namely, dry heat resistance, wet heat resistance, wear resistance, adhesion, gloss value, film thickness, and temperature difference between cold and hot. Among them, the adhesion, wear resistance, and temperature difference between cold and hot are particularly important, which determines the service life of the paint film on the surface of wood furniture.

Mechanical property test of furniture

A mechanical property test is a test of the strength or bearing capacity of the combined furniture mechanical property testing machine to simulate the strength or bearing capacity of each part of the furniture under the condition of one-time or repeated load during normal use and habitual use.

According to the normal use frequency of the product under the predetermined use conditions and the possible misuse strength, the strength and durability are divided into five levels according to the size of the loading force and the number of loading times, that is, the test level is determined by whether the product is used frequently or not, and the static load, durability and impact test are carried out on the product.

Environmental performance test

It mainly detects free formaldehyde and soluble heavy metals in wooden furniture. The national standard specifies three methods for the determination of formaldehyde content of emission: perforated extraction method, dryer method, and climate box method (environmental test chamber method); The detection of soluble heavy metals is to scrape an appropriate amount of coating on the surface of furniture products and determine the content of soluble metals in paints and varnishes by atomic absorption spectrometry according to national standards.

Searching for a Furniture Test Machine supplier, wholesaler, manufacturer from China, you can get high-quality products at a nice price.