Installation and Maintenance of Hydraulic Universal Testing Machine

The hydraulic universal testing machine has been widely used in the testing of mechanical properties of building materials and metal materials because of its excellent control performance and testing accuracy. In the laboratories of large iron and steel enterprises and quality inspection units, the testing machine is often used for high load tasks. However, most of the experimental personnel lack protection experience, so there are often problems.

Although the servo hydraulic universal testing machine is fine, it is not exquisite. As long as we master the following points, the user will be satisfied.

Maintenance of servo hydraulic universal testing machine

• Accumulator

Some servo hydraulic universal testing machines are equipped with accumulators. It is necessary to ensure that the accumulator pressure is in a normal working state. If insufficient pressure is found, it needs to be replenished immediately. Only nitrogen is allowed to be charged into the accumulator;

• Regular patrol inspection of components

Students are required to check the data timing information of all working pressure control valves, flow control valves, pump regulator control, social pressure relays, travel switches, thermal relays, and other signal processing equipment;

• Cooler

The crud of the cooler for air cooling shall be sorted out regularly; If water cooling is adopted, regular investigation and research shall be carried out to cool the copper pipe.

Servo hydraulic universal testing machine is a commonly used testing machine, which is widely used in many industries. It can be seen that the first task is to do a good job of installation to give greater play to its role.

Installation conditions of servo hydraulic universal testing machine

1. When installing the universal testing machine 20 ton hydraulic, we must pay attention to the installation of the main engine. When installing the main engine, we must pay attention to maintaining the installation in a dry and clean place. We must ensure that the installation environment is free from any vibration and that the surrounding temperature is uniform, which is the requirement for environmental conditions.

2. It should be noted that sufficient maintenance space must flow out around the equipment during installation so that a better maintenance effect can be achieved in case of problems in subsequent use.

3. When installing the universal testing machine 20 ton hydraulic, it is also necessary to pay attention to placing the main machine on the foundation of the concrete platform. The specific size needs to be determined according to the actual situation of the foundation drawing. To ensure that the top of the foundation must be completely horizontal, it is necessary to use a leveling ruler for correction. It is necessary to wait until the foundation is completely dry before installation, to achieve a better installation effect and ensure the subsequent normal use, which also needs attention.

There are many conditions for the installation of a universal testing machine 20 ton hydraulic. These are very important conditions that need to be understood by every user. Only in this way can we achieve a better installation effect. If you want to know servo hydraulic universal testing machine working principle, welcome to contact us.