- +86 138 2726 8067
- haidaequipment@qc-test.com
Menu
PRODUCT DESCRIPTION
HD-A504-B (High pressure for board) automatic burst strength tester is an instrument for testing the strength properties of cardboard. It is mainly suitable for testing various card-boards and single-layer and multi-layer corrugated cardboard.
DESIGN STANDATD
Paperboard: TAPPI T810, ISO2759-2001, GB/T 1539
SPÉCIFICATIONS GÉNÉRALES
Packaging Dimensions: (W x D x H) 810x750x850mm (approx.)
Power Supply Source: Single-phase, 220V, 50Hz (can be appointed)
Gross Weight: 95kg (approx.)
CARACTÉRISTIQUES STANDARD
| Article | Description |
| Capacité | 5~45kgf/cm^2(0.1kgf/cm^2) |
| Force de serrage | 600~1200 kPa |
| Unité | kPa, lb/po², kgf/cm² |
| Résolution | 0,1 kPa |
| Méthode de détection | Transmetteur de pression |
| Mode de fonctionnement | Touch Screen Control |
| Matériau de l’anneau | Acier inoxydable SUS304 |
| Inner diameter of clamp ring | upper clamp ring: Φ31.5±0.1mm
lower clamp ring: Φ31.5±0.1mm |
| Course maximale | 18mm (without clamp) |
| Vitesse de pressurisation | 170 ± 15 ml/min |
| Dimensions (L×l×H) | 560mmx500mmx600mm (approx.) |
| Poids | Appro. 60kg |
| Alimentation | Single-phase, 220V, 60 Hz |
| Hydraulic oil | Huile de silicone 100% |
| Source d’air requise | ≥0.6Mpa (provide by customer self) |
| Accessoires | one piece higher pressure rubber film,
one piece wrench, 10 pieces higher pressure correction sheet, one bottle silicon oil, one piece English user manual |
Fabricant chinois d’équipements de test avec 20 ans d’expérience
Adresse : Chambre 101, Bâtiment 3, N°1, Route Dongwei 1ère, Rue Wanjiang, Dongguan, Guangdong.
Téléphone : +86 138 2726 8067
E-mail : haidaequipment@qc-test.com
