- +86 138 2726 8067
- haidaequipment@qc-test.com
Menu
product introduce:
Led Xenon Aging Test Machine can simulate full sunlight spectrum xenon arc lamp to reproduce the destructive waves of light of different environment, for scientific research, product development and quality control to provide the corresponding environmental simulation and accelerated test ,main for Solar lights, garden lights, buried lights, tunnel lights, car lights, fountain lights, the display etc led lights series.
MAIN FEATURE:
1, Ventilation system: Automatic controlled by temperature controller, and inner chamber cooled by refrigerating system
2, Back panel thermometer: adopt wired transmission technology, which highly improve the control accuracy.
3, Temperature sensor: PT100 platinum resistance temperature body.
4, Equip with intelligent temperature and humidity controller, with PID adjustment and rapid self-turning. It can set several parameters to do cyclic test, directly digital temperature display for easy reading.
5, Multiple protective devices: Over temperature protection, water leakage alarm, over pressure of compressor, electricity leakage protection, alarm and auto power offer protection. In order to protect Xenon light, the light will turn off automatically once open the door.
MAIN PARAMETER:
| Item | Specification |
| Internal Dimension (W*D*H) | 800*800*800mm |
| External Dimension (W*D*H) | 1450*1500*2000mm |
| Inner chamber material | SUS 304 # Stainless Steel, Anti-rust, easy to clean |
| Outer chamber material | Stainless steel |
| Chamber Temperature | 40±3℃ |
| Temperature Uniformity | ≤3℃ |
| Blank panel temperature | 65±3℃ |
| Humidity Range | 55%-90% |
| Irradiated intensity | 0.35±0.02w/m²at 340nm (within±10%) |
| Xenon lamp power | 6.KW water-cooled xenon lamp x 1pc |
| Control system | Siemens PLC controller, auto display irradiance |
| Distance from specimen to arc center | 250~300mm, Effective exposure area 6400cm2 |
| Filter | Borosilicate filter inside and outside |
| Water pressure at nozzle | 1 – 1.5 bar |
| Sample rack | Stainless steel rotary sample rack, 3-7rpm |
| Door seal | Silicone rubber seal |
| Temperature sensor | PT100 high precision temperature sensor |
| Air circulation system | Stainless steel centrifugal rotor vane to improve the uniformity of temperature and humidity |
| Cooling ventilator | Automatic controlled by temperature controller, and inner chamber cooled by refrigerating system |
| Cooling ventilator | France Tecumseh compressor |
| Power | AC380V, 50Hz, three phase |
| Safety Protection | Over heat protection for fan, Over load protection for cooling system, Over pressure protection for cooling system, Over temperature protection, Over heat and over flow protection for water pump, Leakage protection, Water shortage protection, Auto stop after failure warning |
Produttore cinese di apparecchiature di test con 20 anni di esperienza
Indirizzo: Camera 101, Edificio 3, No.1 Dongwei 1st Road, Via Wanjiang, Dongguan, Guangdong.
Telefono: +86 138 2726 8067
E-mail: haidaequipment@qc-test.com