- +86 138 2726 8067
- haidaequipment@qc-test.com
Menu
Product Description
The thermal conductivity tester adopts the transient plane heat source method, based on TPS transient plane heat source technology, and uses a Hot Disk probe. It can be used to test the thermal conductivity, thermal conductivity (thermal diffusion coefficient), specific heat capacity, thermal storage coefficient and thermal resistance of metals, alloys, graphite, thermal grease, silicone, silicone rubber, ceramics, rock and soil, rocks, polymers, paper, fabrics, foam plastics, concrete, composite panels, paper honeycomb panels and other solids, powders, liquids, pastes, coatings, films, thermal insulation materials, insulation materials, anisotropic materials, etc.
Test Standards: ISO 22007-2:2008, GB/T32064-2015, etc.
Product Specifications
| Model | 60088-HD |
| Thermal conductivity range | 0.001~500 w/(m.k), resolution 0.0001w/(m.k) |
| Thermal diffusion coefficient range | 0.1~100m2/s |
| Thermal storage coefficient range | 0.1~30w/(m2.k) |
| Specific heat capacity range | 0.1~5kJ/(kg.℃) |
| Thermal resistance range | 0.5~0.000005mm2.k/w |
| Temperature measuring accuracy | ≤0.0001℃ |
| Measurement relative error | ≤3% |
| Repeatability error | ≤3% |
| Measuring time | 1~120 seconds |
| Sample test temperature range | Room temperature (Various high and low temperature control chamber or test states under vacuum can be optional according to customer requirements) |
| Probe | Φ15mm |
| Various sample tests | a. Solid block or round, square, or special-shaped samples do not require special preparation, only a relatively flat sample surface is required, and a special sample clamping device is provided. |
| Various sample tests | b. There are no special requirements for powder, paste, or liquid substances, and a special sample test box is provided. |
| Various sample tests | c. For thinner materials (thickness 0.01-1mm), special test plans and mathematical models are used for testing. |
| Various sample tests | d. For high-conductivity materials (100-500W), special test plans and mathematical models are used for testing. |
| Various sample tests | e. For thermal insulation materials (0.010-0.050W), special test plans and mathematical models are used for testing. |
| Control mode | Fully automatic test software, fast and accurate analysis of sample test process parameters and report output |
| Machine dimension | (L*W*H)380*40*450mm |
| Machine weight | Approx. 20KG |
| Power | AC 220V±10%, 50/60 Hz, 500W |
Chiński producent urządzeń testowych z 20-letnim doświadczeniem
Adres: Sala 101, Budynek 3, Nr 1, Dongwei 1st Road, Ulica Wanjiang, Miasto Dongguan, prowincja Guangdong.
Telefon: +86 138 2726 8067
E-mail: haidaequipment@qc-test.com