EQUIPMENT DETAILS OF SALT SPRAY CHAMBER
Packaging Dimensions: (WxDxH) 2550*1550*1650mm
Power supply source: single-phase, 220V±10%, 50Hz (can be appointed)
Gross Weight: 300kg
HS Code: 8479899990
Internal Size (W*D*H)
External Size (W*D*H)
P.V.C rigid plastic plate, thickness 8mm
Diameter 10mm glass fiber rod, anti-rust
V-shape plastic steel to make sure sample in 15~30 degree inclined
Room temperature ~ 55℃
Continuous and Periodic spray type
Test Chamber Temperature
Salt Spray Method (NSS ACSS)35±1℃
Saturated air Barrel Temperature
Salt Spray Method (NSS ACSS)47±1℃
1.0~2.0 ml / 80cm2 / hr
Salt Spray Method (NSS ACSS6.5~7.2)
Brine Tank Capacity
Multiple Safety Protection Devices
Current discharge protection, over pressure protection, over temperature protection, over load fuse protection
Testing Salt / Measuring tank / Spray Nozzle x 1 set
1HP Air pump (provided by buyer)
ASTM B117-08, ISO 9227...
1. Durable hard 5 mm PVC construction, anti-corrosion and easy to clean.
2. Reservoirs with mixing system on stand.
3. Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
4. Exposure zone lined with corrosion-resistant PVC sheets.
5. Clear cover allows viewing of test conditions.
6. Peaked cover prevents dripping of condensation onto samples.
7. Water seal and water level protection system.
8. Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
9. Automatic DI water fills to humidifying tower.
10. Digital temperature control.
11. Integral over-protection on heaters.
12. Low water cut-off protection on humidifying tower.
Sodium chloride (testing salt) Measuring tank
EQUIPMENT DETAILS OF CLIMATE CHAMBER
Temp. Humid. Programmable Controller
German Bock compressor
Packaging Dimensions: (WxDxH) 2400*1680*1900mm
Power supply source: three-phase, 380V±10%, 50Hz (can be appointed)
HS Code: 8479899990
Internal dimension (W*D*H)
External dimension (W*D*H)
20~60%RH (Refer Image below)
1℃/min in average (without loading)
3℃/min in average (without loading)
Internal chamber material
SUS#304 stainless steel, mirror finished
External chamber material
LCD touch screen, programmable control temperature and humidity
Can set different parameter for cyclic test
50mm high density rigid Polyurethane foam
Explosion-proof type SUS#304 stainless steel fins radiator pipe heater
France Tecumseh compressor x 2sets
PT-100 dry and wet bulb sensor
Diameter 50mm, for cable routing
SUS#304 stainless steel, 2pcs
Safety protection device
Protection for leakage
Compressor overvoltage and overload
Heater short circuit
1. To simulate test environment with different temperature and humidity
2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
3. Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
4. Uncover test unit weakness in a short-term test with accelerated time effect
CHAMBER DESIGN FEATURES
1. High performance and quiet operation (68 dBA)
2. Space-saving designed for flush installation to wall
3. Full thermal break around doorframe
4. One 50mm diameter cable port o left, with flexible silicone plug
5. Accurate wet/dry-bulb humidity measurement system for easy maintain
1. PLC controller for test chamber
2. Step types include: ramp, soak, jump, auto-start, and end
3. RS-232 interface to connect computer for output