- +86 138 2726 8067
- haidaequipment@qc-test.com
Menu
Applications:
This High low temperature tensile strength tester can do tensile test, tear test, peel test, bond test with different clamps for textile, fabric, leather,tape, film and other kind of materials with high low temperature environment.
This tensile test equipment uses the motor to drive screw to move fixtures. Fix sample between upper and lower fixture and pull sample by the upper fixture upward with specified speed. The load cell connecting with upper fixture will sense the force and then convert it into voltage sign to the display screen. Force value will be displayed automatically on the screen.
Feature:
Applications(tensile testing):
Deformation under defined load: Test deformation under defined load of tested sample
Load under defined deformation: Test load under defined deformation of tested sample
Software can issue report with results for max. force, elongation, tensile strength, peel strength, tear strength, compression strength, etc.
This machine can do different test as per customer requirement such as peel test, tear test, compression test, bend test with different clamps.
Design Standard(inculding but not limited to…):
Tensile Test: ASTM D882 ASTM D 638 / ISO 527-1/2
Bend Test ISO-178 / ASTM D 790
Tear Test：ASTM D 624
Peel Test : ASTM D 3330
Compression Test : ASTM D 659
Specifications:
| Tensile Tester | |
| Frame capacity | 2000kg |
| Load cell brand | Germany brand load cell for high accuracy |
| Load accuracy | 0.5% F.S |
| Control system | PC with windows 7 system |
| Motor | Panasonic servo motor w/AC variable speed drive system, high-precision mechanical ball screw rod |
| Force reading | kgf, Ibf, N, KN, T etc |
| Vertical test space | 1200mm including fixture |
| Test speed | 0.1~300mm/min (adjustable) |
| Curves display | Load- elongation, Elongation-time, Time-elongation, Stress-strain |
| Data display | Max. force, speed, sample information, strength(Kpa, Mpa, N/mm, N/mm2) etc… |
| Internal dimension(W*D*H) | 400*500*500mm |
| High & Low Temperature Chamber | |
| Temperature range | -40~+150℃ |
| Temperature Accuracy | ±1℃ |
| Cooling speed | 1℃/min in average (without loading) |
| Heating speed | 3℃/min in average (without loading) |
| Internal chamber material | SUS#304 stainless steel, mirror finished |
| External chamber material | Stainless steel with paint spray |
| Cooling method | Air cooling |
| Controller | LCD touch screen, programmable control temperature and humidity can set different parameter for cyclic test |
| Insulation material | 50mm high density rigid Polyurethane foam |
| Heater | Explosion-proof type SUS#304 stainless steel fins radiator pipe heater |
| Compressor | France Tecumseh compressor |
| Lighting | Heat resistance |
| Temperature sensor | PT-100 dry and wet bulb sensor |
| Observation window | Tempered glass |
| Testing hole | Diameter 50mm, for cable routing |
| Sample tray | SUS#304 stainless steel, 2pcs |
China testing equipment manufacturer with 20 years of experience
Address :Guangdong Dongguan Room 101, Building 3, No.1 Dongwei 1st Road, Wanjiang Street, Dongguan, Guangdong.
Phone : +86 138 2726 8067
Email : haidaequipment@qc-test.com