How Does Furniture Testing Machine Test Table Stability?

Recently, many people have wondered how furniture testing equipment, furniture testing equipment, and wooden furniture testing equipment test the stability of the table. We will answer this blog for you. There are two ways to test the stability of the table by the furniture testing instrument.

Stability test under vertical load of table:

Place the table to be tested on the test bench. The center of the most unstable table edge is 50mm inward from the edge of the table top through the loading pad, and the force is gradually applied vertically downward to the specified force value or at least until at least one table foot of the test piece is off the ground.

Stability test under table vertical and horizontal loading:

Place the table on the test base. Block the table legs on the most unstable side of the test piece with a stopper. Prevent the specimen from moving during the test. A force of 100 N was applied vertically downward through the loading pad at the table top 50 mm inward from the edge from the center of the edge. At the same time, a horizontal force is applied outward on the side center table. Gradually increase the force to the specified value or until at least one table leg is off the ground.

The above are the two methods of testing. For more questions, please feel free to contact us.