Aplikace:

Zero Drop Tester is mainly used to evaluate the damage by drop impact on the package during actual transportation, loading and unloading, and to assess the impact strength of the package and the rationality of the package design during the transportation process., especially for drop test of larger packages.

HD-A520-3 Drop Tester is mainly used to test angles, faces and corners of package.

This machine can freely set the drop height, which can make the sample fall freely instantly.

Načítání
Simulace míry dopadu při pádu během nakládky

Doprava
Simulace účinku pádového nárazu při automobilové přepravě

Manipulace
Simulace odolnosti obalu vůči nárazům během manipulace

Návrhová norma:

ISTA, ISO 2248-1985, GBT 4857.5-92

Rozměry balení:
Packaging Dimensions: (WxDxH) 2460*1620*2150mm
Power supply source: Three-phase, 380V±10%, 50/60Hz (can be appointed)
Gross Weight: 1440kg

Vlastnost:
Hardware features

1. The whole is composed of thickened square pass, channel steel and solid steel to avoid impact displacement during the test process and ensure the stability of the machine;

2. Vzhled stroje je zpracován procesem lakování, což zajišťuje vysokou odolnost proti rezavění a estetický vzhled;

3. The load-bearing E-shaped bracket is strong, up to 500kg;

4.Use the cable displacement encoder to feed back the height in real time to ensure the accuracy of the data; and using hydraulic cylinder and air cylinder, with high efficiency;

5. After the E-shaped bracket of the load falls to the bottom plate, there is an anti-secondary impact impact device on the bottom plate to ensure the accuracy of the data.

6. Data indicators: load ≤500kg, drop height 0~1000mm

Software Features

1. Používá se řízení programem PLC s dotykovým displejem, snadné ovládání;

2. Intelligent design such as limit protection, overload protection and automatic return to ensure safe operation;

3. Abnormal fault alarm prompt to ensure safe operation.

Specifikace: