- +86 138 2726 8067
- haidaequipment@qc-test.com
Menu
Description du produit
The hot wire thermal conductivity tester (transient method) is measured using the line source test method of the thermal probe.
This thermal probe has a very large aspect ratio to achieve the simulation conditions of an infinitely long and infinitely thin heat source. It is easy to use, with a plug-and-play probe sensor quick interface and simple software interface operation, allowing users to quickly master and accurately operate. From the beginning of preparation for the test to obtaining the results, it usually takes only 1~2 minutes. It has the advantages of a wide range of applications, fast measurement speed, and accurate measurement results. It has the advantages of small size, easy to carry, and higher cost performance to meet the production, quality inspection, and R&D needs of related industries.
Test Standards: ASTM D5334-2008, GB/T 10297-2015, GB/T 11205-2009, ASTM C1113-2009, ASTM D5930-2009, etc.
Spécifications du produit
| Modèle | 60085-HD |
| Plage de conductivité thermique | 0.0001~50 W/mK; resolution: 0.0001w/mk |
| Measurement relative error | ≤3% |
| Erreur de répétabilité | ≤3% |
| Résolution de température | 0.01℃ |
| Measuring time | 2~180 seconds |
| Sample test temperature range | Room temperature (Various high and low temperature control chamber or test states under vacuum can be optional according to customer requirements) |
| Tested samples | Plastic, soil, soft rock, liquid; paste, granule, powder and other materials |
| Sample shape | Block, flake, paste, powder, granule, colloid, liquid (round, square, irregular shape, no restrictions on shape), only a relatively flat sample surface is required |
| Taille de l’échantillon | Cylindrical samples, ≥φ30 mm; |
| Taille de l’échantillon | Square samples, 30*30mm; |
| Taille de l’échantillon | Irregular samples, thickness ≥1mm |
| Mode de contrôle | By computer and software |
| Dimensions de la machine | (L*W*H)380*400*165mm |
| Poids de la machine | Approx. 5KG |
| Alimentation | AC 220V±10%, 50/60 Hz, 200W |
Fabricant chinois d’équipements de test avec 20 ans d’expérience
Adresse : Chambre 101, Bâtiment 3, N°1, Route Dongwei 1ère, Rue Wanjiang, Dongguan, Guangdong.
Téléphone : +86 138 2726 8067
E-mail : haidaequipment@qc-test.com
