Описание продукта

PC Control Tensile Tester is used for a wide variety of materials for equipment static load, tensile, compression, bending, shear, tear, peel, such as mechanical performance test of mechanical strength testing machine, apply to the plastic sheet, pipe, profiles, plastic and rubber, wire and cable, steel, glass fiber and other materials of various physical and mechanical properties testing for material development，The operation is simple, the entire computer control, PC data analysis, data save and print, visual strength change in the testing process.

Standards:
inculding but not limited to ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113

Основной технический параметр 

Product Features:

1. Displacement resolution: 0.001mm
2. Control system: a, computer control with TM2101software;b, Back to origin automatically after the test, c, store data automatically or by manual operation
3. Motor system: ACMotor +Driver +High precise ball screw (Taiwan)
4. Graph scale automatic optimization can make graph to display with best measurement and can implement graphics dynamic switching in the test and has force-elongation, force- time, elongation -time, stress – strain.
5. It can save results automatically after test finished, and it is manual filing. It can display maximum force, yield strength, compressive strength, tensile strength, elongation, peel interval maximum, minimum and average, etc.
6. User can set parameters of product materialsuch as length, width, thickness, radius, area and so on.
7. Many languages random switching: Simplified Chinese, Traditional Chinese, and English.

Применение:

1. Tensile Test
   2. Compression Test
   3. Peel Test
   4. Bend Test
   5. Tear Test
   6. Shear Test
   7. and customizable test properties

Установка и регулировка:

1. Извлечь испытательную машину из упаковки и проверить, не повреждена ли она во время транспортировки.
2. Установить испытательную машину на прочную платформу или рабочий стол и убедиться, что прибор установлен в горизонтальном положении в соответствии со стандартами.
3. Проверить, соответствует ли напряжение питания 220 В переменного тока; разница напряжения не должна быть менее 5–10% от номинального значения; шнур питания должен быть заземлён.