- +86 138 2726 8067
- haidaequipment@qc-test.com
Menu
Caratteristiche del prodotto
Medical Needle Tip Strength and Piercing Force Tester is used to test the puncture force performance of the syringe tip, evaluate whether the sharpness of the syringe meets the standard requirements, and is also known as the Syringe puncture force tester.
PARAMETRI TECNICI
| Caratteristica | Descrizione |
| Caratteristiche del prodotto | |
| Display | 7-inch K600+ core / dot matrix 65-color, 800*480 resolution touch screen, dynamically displays loading force value via PLC control system. |
| User Interface | Selectable: Chinese / English / Chinese-English switchable. |
| Control & Data Acquisition | Digital closed-loop control, AD sampling speed of 500KHz, internal resolution of 500,000. |
| Data & Protection | High-precision clock chip, power-off storage; Overload alarm and automatic shutdown protection. |
| Touch Controls | Nominal specification, Test item, Applied load, Print, Test, Up, Down, Time, Calibration. |
| Stampa | Built-in printer outputs test results. |
| Standards & Testing | |
| Execution Standard | Designed and manufactured per standard “YY0043-2016” (Medical Suture Needles). |
| Elementi di prova | Strength, Puncture Force. |
| Specifiche | |
| Nominal Specification | 0.2 ~ 2.4 mm (can be arbitrarily selected). |
| Set Load | 0.01 ~ 2.0 N, error not greater than ±1%. |
| Die Hole Diameter | Ø5 mm. |
| Loading Rate | Speed ≤ 10 mm/s when loading to the set value. |
| Steel Block Hardness | HRC ≥ 60. |
| Test Consumable | Aluminum foil. |
| Printing Method | Each print can output 3 puncture force test data points, their average value, and the strength test result. |
| Shipping List & Power | |
| Shipping List | Main unit x1, Qualification certificate x1, Matching fixtures, Operation manual x1, Printer paper x1 roll, Matching weights. |
| Alimentazione elettrica | 220V / 50Hz. |
| Data & Physical | |
| Data Saving | Built-in needle printer / Can be saved to U drive for computer storage. |
| Peso netto | 12 kg. |
| Dimensioni complessive | 400 × 240 × 240 (mm). |
Produttore cinese di apparecchiature di test con 20 anni di esperienza
Indirizzo: Camera 101, Edificio 3, No.1 Dongwei 1st Road, Via Wanjiang, Dongguan, Guangdong.
Telefono: +86 138 2726 8067
E-mail: haidaequipment@qc-test.com
